Brush Fencing

A Warm and Rustic feature – Privacy without cold metal finish – Can help reduce irritating road noise

If you like the privacy that a colorbond boundary fence offers, but prefer a warmer and
more rustic finish – our stylish Brush Panel Fencing could be the perfect solution. Tea tree branches are stitched together with galvanised wires and can help to drown out unwanted road noise. Made in Australia with sustainably sourced Tea tree and pressed to 50ml thick, sturdy and strong – its quality is far superior to many of the other options on the market today.

Step 1
Mark out and dig post footings at
1800mm hole centres and 600mm deep.

Step 4
Using a temporary brace to support the posts, concrete the posts into the ground.
Ensure the posts are aligned vertically using a spirit level. Allow the concrete to set overnight.

Step 2
Assemble the frame of your panel by screwing two C section posts backto-back and place posts in holes.

Step 5
Insert brush panel, ensuring it is framed within the side posts and bottom rail.

Step 3
Screw the bottom rail (55mm high x 60mm
wide U channel) into position allowing
650mm overall for concreting into ground
and the lower rail to sit around 50mm
above ground level

Step 6
Fit top rail and screw into position.